Skip to content
Glossary

What Is a Calibration Target?

A calibration target is a printed or digital pattern that gives an ADAS camera a known visual reference. The target helps a technician align the camera with the vehicle’s centerline and road position. During windshield service, the target supports accurate calibration after the camera’s mounting position changes.

Quick Facts About Calibration Target

Category

ADAS calibration equipment

Used for

Camera alignment

Common confusion

Not a diagnostic scan tool

Also called

ADAS Target, ADAS calibration target

Often discussed with

ADAS Calibration, Windshield Replacement

Key Takeaways About Calibration Target

  • The target uses a known pattern, not a random image.
  • Its position must match the vehicle and camera setup.
  • A calibration target is not the same as a scan tool.

How Calibration Target Works

A hand holds a calibration target card inside a car, with a blurred street and building outside

A calibration target gives a windshield-mounted camera a fixed visual pattern to read. The technician places the target in a controlled position in front of the vehicle. The camera compares the pattern with its expected location and angle.

Related glossary terms: ADAS, Windshield Sensor, OEM Glass.

Vehicle setup guides determine where the target sits. The setup may account for the vehicle centerline, windshield angle, ride height, and camera location. A camera must recognize the target clearly, so lighting and a flat placement area also matter.

After a windshield replacement, ADAS Calibration may use the target to set the camera’s viewing reference. The calibration system checks whether the camera aims where the vehicle system expects. A scan tool may then confirm the system’s status.

A man shows a calibration target sheet to a woman across a table in a home office

From the WindshieldRepairWoodinvillewa.com team

When we handle ADAS Calibration, we check the target position against the vehicle’s centerline and camera location. We also look for a clear pattern, steady placement, and suitable lighting. These checks help us avoid treating a target setup problem as a camera fault.

Calibration Target in Practice: A Real-World Example

After a windshield replacement, a vehicle’s forward-facing camera may need calibration. The technician places a calibration target ahead of the vehicle, aligns the setup, and runs the required calibration process.

Related Terms

ADAS

ADAS is an acronym for Advanced Driver Assistance Systems, a group of vehicle technologies that help…

Windshield Sensor

A windshield sensor is a device mounted on or near a vehicle’s windshield that detects visual…

OEM Glass

OEM Glass is replacement auto glass made to the vehicle maker's original design and fit requirements…

WindshieldRepairWoodinvillewa.com

Have Questions About Calibration Target?

Contact WindshieldRepairWoodinvillewa.com for practical guidance on Calibration Target and related auto glass repair work in Woodinville.

(425) 437-2131