Skip to content
Glossary

Auto Glass Repair Glossary

Plain definitions of 35 terms we use on the job in Woodinville.

Term Index

Browse Individual Glossary Pages

Open any term below for a dedicated definition page.

Acoustic Glass

Acoustic Glass is laminated vehicle glass with a sound-damping layer between its glass panels. The layer helps reduce road, wind, and traffic noise inside the cabin. Most acoustic glass appears similar to standard laminated glass, but its interlayer has added sound-control properties. Vehicle manufacturers specify it for selected windshield designs.

Also called: Soundproof Glass

Read full definition

ADAS

ADAS is an acronym for Advanced Driver Assistance Systems, a group of vehicle technologies that help drivers monitor surroundings and respond to road conditions. These systems may use cameras, radar, or other sensors for features such as lane warnings, automatic braking, and adaptive cruise control. Windshield work can affect sensor alignment.

Also called: Advanced Driver Assistance Systems

Read full definition

Adhesive Cure Time

Adhesive Cure Time is the period polyurethane adhesive needs to set and bond a replacement windshield to the vehicle frame. The cure process begins after the glass is installed and the adhesive is exposed to air moisture. The required time depends on the adhesive, temperature, humidity, and vehicle design.

Also called: Safe Drive-Away Time

Read full definition

Airbag Retainer

An Airbag Retainer is a bracket, clip, or attached strip that helps secure a passenger airbag system near the windshield and dashboard. During a windshield replacement, the retainer may connect to the glass or nearby structure. Its position helps keep the airbag aligned with its intended deployment path.

Also called: Airbag Clip

Read full definition

Back Glass

Back Glass is the glass panel fitted at the rear of a vehicle. It forms the rear window opening and may include built-in defroster lines, an antenna, or other vehicle features. Back glass is often part of a liftgate or trunk area, and replacement requires matching the panel to the vehicle design.

Also called: Rear Glass

Read full definition

Calibration Target

A calibration target is a printed or digital pattern that gives an ADAS camera a known visual reference. The target helps a technician align the camera with the vehicle’s centerline and road position. During windshield service, the target supports accurate calibration after the camera’s mounting position changes.

Also called: ADAS Target

Read full definition

Ceramic Frit

Ceramic Frit is a baked ceramic coating printed around the edge of automotive glass. The dark band helps shield the adhesive from sunlight, covers the bond line, and gives the glass edge a finished appearance. Small dot patterns can soften the visual change between the dark band and clear glass.

Also called: Frit

Read full definition

Chip Repair

Chip Repair is a windshield repair method that fills a small area of glass damage with clear resin. The resin bonds with the surrounding glass and helps seal the damaged spot. Technicians inspect the damage before treatment, because size, location, depth, and contamination affect whether repair is suitable.

Also called: Rock Chip Repair

Read full definition

Cutout Tool

A Cutout Tool is a hand-operated or powered device that separates a windshield from its bonded adhesive. The tool guides a cutting wire or blade around the glass edge. This process removes the old windshield while helping limit damage to the vehicle’s painted pinchweld and surrounding trim.

Also called: Glass Removal Tool

Read full definition

Door Glass

Door Glass is the movable or fixed glass panel fitted into a vehicle door. The panel lets occupants see outside while helping close the door opening. Most door glass moves through a glass run channel and connects to a power window regulator. Vehicle design determines the panel’s shape, tint, mounting points, and operation.

Also called: Side Door Glass

Read full definition

Glass Run Channel

A Glass Run Channel is a fitted guide inside a vehicle door that holds the side window edges and helps the glass move smoothly. The channel uses a flexible lining to cushion the glass, reduce rattling, and keep the window aligned as the window regulator raises or lowers it.

Also called: Window Run Channel

Read full definition

Hydrophobic Coating

A hydrophobic coating is a thin treatment for glass that causes water to bead and move away more easily. The coating changes how moisture spreads across the surface. On a windshield, this effect can help rain clear from the glass when wipers are used, but it does not repair chips, cracks, or scratches.

Also called: Water-Repellent Coating

Read full definition

Laminated Glass

Laminated Glass is a windshield material made from glass layers joined by a clear plastic interlayer. The interlayer helps hold the glass together when damage occurs. This construction supports visibility, occupant protection, and the windshield’s role in the vehicle. Laminated glass is common in windshields and some other vehicle glass.

Also called: Safety Glass

Read full definition

Liftgate Glass

Liftgate Glass is the glass panel fitted into a vehicle’s rear liftgate, the hinged door that opens upward. The panel may include a defroster, wiper, antenna, or other built-in features. It provides rear visibility and forms part of the liftgate assembly, so the replacement must match the vehicle’s design and connections.

Also called: Hatch Glass

Read full definition

Molding

Molding is a trim piece fitted around a vehicle windshield. It covers the edge of the glass and helps create a clean transition to the vehicle body. Molding may also help guide water away from the glass edge. Its shape and attachment method must match the vehicle and replacement windshield.

Also called: Windshield Trim

Read full definition

OEM Glass

OEM Glass is replacement auto glass made to the vehicle maker's original design and fit requirements. The glass matches the factory part's shape, thickness, mounting points, and built-in features. OEM glass may carry the vehicle maker's branding, but the key distinction is its specified fit and function for a particular vehicle.

Also called: Original Equipment Glass

Read full definition

Pinchweld

A pinchweld is the metal flange around a vehicle body opening where the windshield is fitted. The flange joins inner and outer body panels and provides a mounting surface for glass adhesive. During windshield replacement, the pinchweld must stay clean, sound, and properly prepared so the new windshield seats in its intended position.

Also called: Pinch Weld

Read full definition

Polyurethane Adhesive

Polyurethane Adhesive is a flexible bonding material that secures automotive glass to the vehicle body. The adhesive forms a strong seal between the windshield and the pinchweld, the prepared frame opening. It also helps keep water and air out while allowing slight movement between the glass and vehicle structure.

Also called: Urethane Adhesive

Read full definition

Power Window Regulator

Power Window Regulator is the mechanical assembly that raises and lowers a vehicle’s side window. An electric motor drives the regulator through cables, arms, or a track. The regulator moves the glass inside the door while the window switch controls the motor. It is separate from the glass, switch, and door weather seals.

Also called: Window Lift Regulator

Read full definition

Primer

Primer is a surface treatment that helps windshield adhesive bond to glass, paint, or the vehicle’s pinchweld. During windshield replacement, primer prepares the bonding area before urethane is applied. Primer is not the main adhesive. It supports a strong, lasting connection between the windshield and the vehicle body.

Also called: Glass Primer

Read full definition

Quarter Glass

A quarter glass is a fixed or movable side window set behind a vehicle's main door glass. It fills a smaller opening near the rear side of the cabin and helps block wind, rain, and outside noise. Some vehicles use quarter glass for added visibility, while others use it as part of the body design.

Also called: Quarter Window

Read full definition

Rain Sensor

A Rain Sensor is a windshield-mounted device that detects moisture on the glass and helps control the vehicle’s automatic wipers. The sensor reads changes in light caused by water droplets. A replacement windshield must place the sensor correctly so the system can detect rain and respond as designed.

Also called: Automatic Wiper Sensor

Read full definition

Resin Injection

Resin Injection is a windshield repair process that places clear resin into damaged glass. The resin fills open spaces in a chip or small crack, then hardens under curing light. This process helps restore the glass structure and improves the damaged area’s appearance without replacing the entire windshield.

Also called: Windshield Resin Repair

Read full definition

Rock Chip

A rock chip is a small area of windshield damage caused by road debris striking the glass. The impact may leave a round pit, a central mark, or short lines that spread from the point of contact. A rock chip can often be assessed for repair before cracks grow or visibility worsens.

Also called: Windshield Chip

Read full definition

Scratch Repair

Scratch Repair is the process of reducing or removing surface marks from auto glass. A technician checks the scratch’s depth, location, and effect on visibility before choosing a method. Light marks may respond to glass polishing, while deep damage may need glass replacement because polishing cannot restore lost material.

Also called: Glass Scratch Removal

Read full definition

Solar Control Film

Solar Control Film is a thin window film that reduces solar heat and glare entering a vehicle. The film also filters ultraviolet light and can change the glass’s appearance. It is applied to the inside of automotive windows, where its tint, shade, and optical clarity depend on the selected product.

Also called: Window Tint Film

Read full definition

Sunroof Glass

Sunroof Glass is the transparent panel fitted into a vehicle’s roof opening. It lets light into the cabin and may open for airflow when the sunroof system supports that function. The panel can be fixed or movable, and its shape, tint, seals, and mounting points must match the vehicle.

Also called: Moonroof Glass

Read full definition

Tempered Glass

Tempered Glass is a heat-treated safety glass made stronger than ordinary glass. Manufacturers heat and cool it in a controlled way, which creates internal stress. When tempered glass breaks, it usually crumbles into small blunt pieces instead of forming long, sharp shards. This glass commonly serves as side windows and other vehicle windows.

Also called: Toughened Glass

Read full definition

Urethane

Urethane is a strong adhesive used to bond an auto glass panel to the vehicle body. In windshield replacement, the material seals the glass against water and air while helping hold it in place. Urethane needs the right surface preparation and curing conditions to form a dependable bond between the windshield and pinchweld.

Also called: Windshield Urethane

Read full definition

Windshield Bullseye

Windshield Bullseye is a circular windshield chip with a central impact point and rings spreading around it. The damage often comes from a small stone or road object. A bullseye may be repairable when the glass stays stable, but its shape, location, depth, and nearby cracks affect the repair decision.

Also called: Bullseye Chip

Read full definition

Windshield Cowl

Windshield Cowl is the panel and drainage area at the base of a vehicle’s windshield. It covers the space around the windshield wipers and helps guide rainwater away from the glass and cabin air intake. The cowl may also support nearby trim, wiring, and wiper parts during windshield replacement.

Also called: Cowl Panel

Read full definition

Windshield Crack

A Windshield Crack is a line or split in laminated windshield glass caused by an impact, pressure, temperature change, or damage that spreads from an existing chip. Cracks vary in length, depth, and shape. Their location and condition help determine whether windshield repair is suitable or whether replacement is needed.

Also called: Glass Crack

Read full definition

Windshield Mounting

Windshield mounting is the process of securing a windshield in the vehicle’s body opening with a bonding adhesive. The mounting process creates a firm seal between the glass and the pinchweld. It also helps place the windshield correctly for related parts, such as moldings, sensors, and the vehicle’s airbag system.

Also called: Glass Installation

Read full definition

Windshield Sensor

A windshield sensor is a device mounted on or near a vehicle’s windshield that detects visual or weather conditions for vehicle systems. Depending on the vehicle, the sensor may support driver assistance features, automatic wipers, or automatic lights. Its position and optical path must stay accurate after windshield service.

Also called: Forward-Facing Sensor

Read full definition

Windshield Wiper

A Windshield Wiper is a movable arm and rubber blade that clears rain, snow, and road spray from vehicle glass. The wiper presses against the windshield and sweeps across it when activated. This action helps keep the driver’s view clear, while worn blades can leave streaks, missed areas, or smears.

Also called: Wiper Blade

Read full definition

(425) 437-2131